Lab 3 – GPIO, SysTick and Interrupt C Programming for a real time operating system RTOS) scheduler using Keil simulator For this lab exercise you will Keil simulator (based on Nucleo-F103RB board). The objective is to understand how the SysTick as the Hardware Timer can be used to provide a periodic interrupt for a Real Time Operating System (RTOS). For simplicity purposes, the GPIO pins will be used in this exercise that represent the scheduled tasks within the RTOS. The aim is to learn

Linux操作系统课程指导：Ch7 Interrupts and Interrupt Handlers.ppt

MultiProcessor Interrupt Controller (MPIC) Core

基于S32KDS平台SDK3.0编写的flexcan组件interrupt例程

介绍了Linux中和中断相关的软硬件知识

KEA64的ADC的FIFO的中断例程， 一共采样3个通道： A7\AD12\AD14。要是不使用FIFO功能的话，在多路采集时，ADC会频繁进入中断，这样对MCU来说是个负担，所以需要开启FIFO功能，这样在所有通道采集完后才进入一次中断，提高了效率。

详解DMA （Direct memory access ）原理， DMA， pooling, interrupt原理； xilinx axi-dma原理，axi4 interconnet bus, xilinx axi-dma原理 ; DMA实现fpga外设与ARM ddr3sdram 交互数据的原理流程、注意。 Cypress CX3 DMA原理，GPIF-II 转态机接口原理图。

ARMv8 arch generic_interrupt_controller gic600_reference_manual_100336_0106_00.

基于MPC5748G的can例程，包含轮询和中断两种模式，官方例程比较少，有需要的可以下载 。

51中断配置Interrupt.c