驱动适用于z3735国产平板： sudo make sudo make install

作者：John Madieu 书名：Linux Device Driver Development : Develop customized drivers for embedded Linux 主要讲述内核驱动的一些经典机制

最新EC20驱动源码和手册还有4G拨号程序 可以参考我的博文

结合本作者博客 Linux简单设备驱动（1）：使用IO内存操作GPIO–LED 的源代码

xilinx的fpga+pcie数据采集卡，包括linux驱动以及测试程序

华为4g模块 pcie me909s-821 linux驱动

RTL8111B/RTL8168B/RTL8111/RTL8168 RTL8111C/RTL8111CP/RTL8111D(L) RTL8168C/RTL8111DP/RTL8111E RTL8168E/RTL8111F/RTL8411 RTL8111G/RTL8111GUS/RTL8411B(N) RTL8118AS Unix (Linux) Apply to RTL8111H(S)/RTL8118/RTL8119i as well. LINUX driver for kernel up to 4.7 2017年2月13日版

麦可网提供的linux驱动开发视频，资源视频、音频清晰，从思维导图上一一讲解，很不错的课程，对驱动初学者很有帮助。地址是百度网盘，密码在txt里面。

这是一套基于Exynos4412-fs4412开发板的Linux驱动开发课程，该课程为期8天，本资源包括字符设备驱动开发实例，块设备驱动开发实例，虚拟网络设备开发实例，除此之外还包括每天的笔记。这是鄙人参加培训实训资料，值得下载，学习该资源可以掌握字符设备、块设备、虚拟网络设备驱动的开发框架。

PCI8系列 PCI9系列 PCI9054 linux驱动程序 PLX SDK Samples ================================================================ ABOUT This document provides a brief description of the samples included in the PLX SDK. Please refer to the source code in each sample & the PLX SDK User's Manual for additional details. The PLX samples are intended to demonstrate use of the PLX API. The samples are not intended for debug or real world applications, although they can be extended to complex applications. They should be treated as a reference for writing custom software that utilizes the PLX API. Not all samples work with all PLX devices. The PLX API supports numerous PLX chip families in PCI/PCIe, including 6000-series PCI-to-PCI bridges, 9000-series PCI-to-Local bus bridges, & 8000-series PCI/PCIe bridges & switches. Some samples are provided only for specific chip families. SAMPLES - ApiTest Simple application that calls various PLX APIs for a selected device & verifies return codes & parameters. The API calls made depend upon the type of device selected. - DSlave Demonstrates how to read/write from a PLX 9000 PCI BAR space using the PLX API/driver to perform the data transer. This operation is often referred to as "Direct Slave". - DSlave_BypassApi Similar to the 'DSlave' sample, except this sample uses the PLX API only to map a PCI BAR space directly to the application's virtual space. The application can then directly access the space via simple memory dereferencing, bypassing the PLX API/driver & resulting in greater performance, especially for small transfers. The application is responsible for initializing the BAR space, such as setup of translation/remap registers. - LocalToPciInt [9000-series & 8311] Demonstrates how to wait for a generic Local-to-PCI interrupt using the PLX Notification API. - NT_DmaTest [8000-series switches with DMA & NT support] Demonstrates using the DMA engine in a PLX 8000 switch to transfer data through a PLX